List of products by brand Blumotix

Il y a 8 produits.

Affichage 1-8 de 24 article(s)
  • BX-2XIO - Interface KNX...

    Prix 86,40 €

    BX-2XIO is a 2-channel push button interface used to acquire external commands.
    The device is equipped with a 15 cm long cable and 2 pairs of wires for direct connection to the push buttons. The wires have different colores to facilitate the recognition of the channels.
    Inputs are individually configurable with ETS to perform the desired function by the designer.
    The device provides load control functions, opening and closing of shutters, adjustment of a light source and the selection of scenarios. Some of these functions exploit the possibility of recognizing the prolonged closure of the auxiliary contact to carry out the command desired.

  • BX-4XIO - Interface KNX...

    Prix 100,80 €

    BX-4XIO is a 4-channel push button interface used to acquire external commands.
    The device is equipped with a 15cm long cable and 4 pairs of wires for direct connection to the push buttons. The wires have different colores to facilitate the recognition of the channels.
    Inputs are individually configurable with ETS to perform the desired function by the designer.
    The device provides load control functions, opening and closing of shutters, adjustment of a light source and the selection of scenarios. Some of these functions exploit the possibility of recognizing the prolonged closure of the auxiliary contact to carry out the command desired.

  • BX-4XIOL - Interface KNX...

    Prix 110,40 €

    This is the new push-button interface equipped with outputs for monitoring the warning LEDs found in modern domestic series.

    The traditional functions previously described for the BX-4XIO device are complemented by a series of communication objects for monitoring warning lights.

  • BX-ACT08 - Actionneur KNX...

    Prix 321,60 €

    The device is equipped with relays that can withstand a current of 170A in the first 2ms. The ETS library exposes commands to control loads, scenarios and logic functions. The terminals accommodate cables up to 5mm2. On the front, there are command buttons and LEDs status signaling. IP20 plastic box, prepared for installation on 35 mm DIN bar with standard 8 modules.

    https://www.blumotix.it/en/products/bx-act08/

  • BX-ACT12 - Actionneur KNX...

    Prix 408,00 €

    The device is equipped with relays that can withstand a current of 170A in the first 2ms. The ETS library exposes commands to control loads, scenarios and logic functions. The terminals accommodate cables up to 5mm2. On the front, there are command buttons and LEDs status signaling. IP20 plastic box, prepared for installation on 35 mm DIN bar with standard 8 modules.

    https://www.blumotix.it/en/?prodotti=bx-act12

  • BX-DM03 - Actionneur de...

    Prix 348,00 €

    BX-DM03 is a 4-channel dimmer actuator for LED lamps with current-mode control, designed to work with the KNX bus.
    The channels can be programmed to work independently with white lamps or can be synchronized to drive the color of a RGB / RGBW lamp.
    It can be used both with white light LEDs, and with RGB LEDs in the common anode configuration. The device can be programmed for constant current control at 35omA, 700mA and 1000mA with 12,24 or 48 Vdc power supplies.
    Each channel can be programmed via dip switches to supply the current for the type of lamp installed, in accordance with the predetermined standard values: 350mA, 700mA and 1000mA.

  • BX-DM04 - Constant low...

    Prix 348,00 €

    KNX 4-channel dimmer actuator for white and RGB LED strips (common anode connection) operating at 12 and 24 Volts.
    BX-DM04 allows to supply a max current for each channel of 7.8A, corresponding to a 40 meter RGB led strip (14.4W / ma 24V).
    It can adjust the brightness by modulating the output voltage of the original power supply with duration pulses programmable (PWM).
    The device works with constant input voltages of 12V and 24V.